Konfigurasi PC Router

1. Mengganti nama interface LanCard

[admin@akbar] > interface print

Flags: X - disabled, D - dynamic, R - running

# NAME TYPE RX-RATE TX-RATE MTU

0 R ether1 ether 0 0 1500

1 R ether2 ether 0 0 1500

[admin@akbar] > interface set 0 name=LAN

[admin@akbar] > interface set 1 name=SPEEDY

[admin@akbar] > interface print

Flags: X - disabled, D - dynamic, R - running

# NAME       TYPE   RX-RATE TX-RATE MTU

0 R LAN        ether  0              0             1500

1 R SPEEDY  ether  0              0             1500

2. Memberi IP pada LanCard

[admin@akbar] > ip address add address=192.168.50.1/24 interface=LAN

[admin@akbar] > ip address add address=192.168.1.2/24 interface=SPEEDY

3. Memberi DNS(Primary dan Secondary)

[admin@akbar] > ip dns set primary-dns=202.134.1.10 allow-remoterequests=yes

[admin@akbar] > ip dns set secondary-dns=202.134.0.115 allow-remoterequests=yes

4. Memberi Gateway

[admin@akbar] > ip route add gateway=192.168.1.1

Untuk mencoba apakah settingan telah berhasil atau belum, lakukan tes ping ke www.google.com

[admin@akbar] > ping www.google.com

5. Setting NAT

Setup masquerading (NAT) agar client dari server mikrotik bisa tersambung ke internet.

[admin@akbar] > ip firewall nat  add action=masquerade out-interface=SPEEDY chain=srcnat